Area of application : Intelligent furniture terminal, for controlling EFL furniture locks Version : Housing with 4 screw straps for fixing Material :Housing: Plastic Colour : Housing: Anthracite/light grey Technical data Voltage supply : 12–17 V DC, 11–14 V AC Connections for power supply for lock :RJ10 socket for EFL 3, EFL 3C AMP socket for EFL 1, EFL 1C, EFL 6, EFL 41 and EFL 7 Connections for data signals : RJ10 socket for MLA 6P, RJ11 socket for MLA 8, AMP socket for CC 140 Connection for antenna :Coaxial socket for 1 antenna Voltage supply : Mains lead with AMP plug Mains lead length : 100 mm Current consumption : 100 mA Output voltage : 10.6 V DC Output current : <750 mA Signal input ports : e.g. for EFL 1 with feedback contact or Reed contact for door monitoring Relay output port : 1 x change-over Number of possible Dialock keys : 199 user keys Operating temperature : 0–50 °C Standard functions - Control by holding an authorised user key in front of the antenna which unlocks the furniture lock by means of a pulse - Spring bolt lock function: Automatic locking after 3 seconds after the lock has been released (variable time setting, can be changed with the Open Time #74 configuration card) - Deadbolt lock function: The lock is locked and unlocked alternately by holding the user key in front of the lock Acoustic feedback for confirming the locking action Optional functions - Indication of the locking status, e.g. for unlocked door, via acoustic or optical signal generators (external LED) - Extension of functions by means of macro programmes (e.g. controlling alarm systems in combination with the FT 120 furniture terminal) FT 120 installation film on CD (Cat. No. 732.29.491). This film shows FT 120 furniture terminal installation, start-up and reset in combination with EFL 1 furniture lock. The opening time can be changed to up to 120 seconds with the spring bolt lock function using the Open Time 74 configuration key card. The FAN 100 antenna is not suitable for installation in metal or metal coated furniture. If 2 antennas are installed (when using two or more FT 120), the distance between the antennas must be at least 25 cm. Only one antenna can be connected to the FT 120 furniture terminal. Information about installation and operation can be found in our online shop. Please contact your responsible Häfele employee for other options or any questions.